Toy Track Engineer

Ten train track layouts worth building, with the pieces you need

These are the layouts the planner was taught from: the pictures on the boxes, the woodenrailway.info track guide and the layout sheets woodentracks.com publishes for Maxim sets. Each one has been laid out in exact geometry and checked to close and lie flat. Open one and the planner shows the build order, lets you ride it, or lets you change it.

Oval

Where everyone starts. Twelve curves, four straights, the 10874 box. Pieces: 4 straights, 12 curves.

Oval (DUPLO) Open in the planner

Oval with two sidings

Two sidings off the oval, one to each side, from the back of the 10882 box. Pieces: 5 straights, 22 curves, 2 points, 2 buffer stops, 1 level crossing.

Oval with two sidings (DUPLO) Open in the planner

Cargo oval with sidings

The 10875 box. The level crossing goes on a long side; the sidings take the cargo. Pieces: 3 straights, 14 curves, 2 points, 2 buffer stops, 1 level crossing, 2 hill ramps.

Cargo oval with sidings (DUPLO) Open in the planner

Oval with a passing loop

A second road across the middle, so one train waits while the other passes. Pieces: 5 straights, 22 curves, 2 points, 2 buffer stops, 1 level crossing.

Oval with a passing loop (DUPLO) Open in the planner

Two loops side by side

Two ovals joined through a pair of points: two 10874 boxes and a 10882. Pieces: 9 straights, 34 curves, 2 points, 2 buffer stops, 1 level crossing.

Two loops side by side (DUPLO) Open in the planner

Figure of eight over a bridge

Two lobes crossing on the bridge, from LEGO’s old layout sheet. Pieces: 16 straights, 24 curves, 1 bridge.

Figure of eight over a bridge (DUPLO) Open in the planner

Oval with a siding

The BRIO starting point with a siding, from the 33346 box. Pieces: 9 large curves, 6 medium straights (144 mm), 1 points, 1 buffer stops.

Oval with a siding (BRIO) Open in the planner

Loop inside a loop

A loop inside a loop, joined through a pair of curved switches, from the BRIO guide. Pieces: 16 large curves, 10 medium straights (144 mm), 2 points.

Loop inside a loop (BRIO) Open in the planner

Two loops sharing a road, one over the other

From the woodentracks 100-piece sheet: two loops sharing a road that climbs over the other on ascending tracks. Pieces: 1 points, 1 short curved switches, 1 short straights (108 mm), 3 long straights (216 mm), 3 mini straights (54 mm), 12 large curves, 4 medium straights (144 mm), 2 ascending tracks, 1 bridge, 2 short curves.

Two loops sharing a road, one over the other (BRIO) Open in the planner

Balloon loop with a raised middle road

From the 59-piece sheet: a balloon loop that turns the train round, and a raised middle road. Pieces: 3 points, 6 large curves, 8 short curves, 2 mini straights (54 mm), 3 short straights (108 mm), 2 medium straights (144 mm), 3 long straights (216 mm), 2 ascending tracks, 1 bridge, 1 buffer stops.

Balloon loop with a raised middle road (BRIO) Open in the planner

See what your own box makes